Fiber · 20 W / 30 W
Fiber laser marking
1064 nm fiber source (Max Pro / JPT M7) for all metals, with a motorised 60 mm Z-axis and up to 200×200 mm marking area.
Fiber details
Now showingVRAY VR-Y5 · XRF gold analyzer
- Elements
- K(19) – U(92)
- Results
- Within 30 s
- Display
- 10.4" touch
Precision laser equipment
Precision lasertechnology.Engineered to perform.
Gold testing, laser marking, laser cutting and laser soldering machines — supplied and supported by Fibertek Solutions, Chennai.
Fibertek Solutions
Laser equipment
Laser equipment
for people who
work in microns.
Fibertek Solutions supplies precision laser marking, cutting and soldering machines to jewellers and manufacturers, and is the distributor in India for the VRAY VR-Y5 XRF gold analyzer.
Every machine we offer is chosen for accuracy, durability and simple day-to-day operation — so your team spends time producing, not troubleshooting.
01Four product categories
021-year warranty on all products
03VRAY VR-Y5 distributor in India
04Based in West Tambaram, Chennai
Fig. — Laser-cut gold filigreeFibertek
Product rangeFour technologies.
Four technologies.
One precise partner.
From verifying gold purity to cutting, marking and joining it — explore the machines Fibertek supplies across the jewellery and manufacturing workflow.
Fig. 01 / 04Fibertek Solutions
XRFNon-destructive
VRAY VR-Y5
Gold Testing Machine
A benchtop XRF analyzer that verifies gold, silver and platinum purity in about 30 seconds — without touching or damaging the piece.
- Detectable elements
- K(19) – U(92)
- Detector
- Si-pin
- X-ray tube
- 50 kV / 1 mA
- Sample chamber
- 310×220×75 mm
Test resultWithin 30 seconds
01 — Gold Testing Machine
VRAY VR-Y5
VRAY VR-Y5
XRF gold analyzer.
Fibertek Solutions is the distributor in India for the VRAY VR-Y5 — a compact benchtop XRF analyzer for jewellers, refiners, pawn shops and laboratories.
- Non-destructiveNon-contact X-ray testing leaves every piece untouched.
- Fast resultsPrecious metal results in about 30 seconds.
- One-touch operation10.4" touchscreen running Windows 10.
- Solid safetyRadiation protection and thermal management built in.
02 — Laser MarkingPermanent marks on
Permanent marks on
gold, silver and steel.
Two laser sources for two kinds of work: fiber lasers for fast, deep marking on all metals, and UV lasers for fine detail with minimal heat.
UV · 3 W / 5 W / 10 W
UV laser marking
Water-cooled UV source rated for over 50,000 hours, with 0.01 mm minimum line width and speeds up to 12,000 mm/s.
UV details
Laser Cutting
Intricate gold cutting
Intricate gold cutting
with less metal loss.
60, 80 and 100 W fiber laser cutting for gold sheet up to 3 mm — built for filigree, monograms, pendants and earrings.
- Metal dust collecting duct for minimal wastage
- Damage control to reuse leftover precious metal
- Maximum dynamics with complex contours
- Gentle on the part being processed
- Least post-cutting treatment required
- Intuitive software for rapid production
- Compact, space-saving footprint
- Reduced non-productive time
POWER RANGE
60W / 80W / 100W
PRECISION
LASER CUTTING
LASER CUTTING · 60 / 80 / 100 W
04 — Laser Soldering
Clean, strong joints.
Clean, strong joints.
Zero post-processing.
1064 nm laser soldering for gold, silver, platinum, titanium and their alloys — precise enough for jewellery repairs, IC leads and tiny heat-sensitive parts.
Zero post-processing
Aesthetically pleasing welds
High weld strength
Improved accessibility
Enhanced productivity
CCD 20× HD view
ApplicationsWhere Fibertek
Where Fibertek
machines work.
Jewellery, refining, testing, electronics and industrial production.
01
Jewellery showrooms
Verify gold, silver and platinum purity in front of customers.
Gold Testing02
Refineries & laboratories
Accurate, non-damaging XRF composition and purity analysis.
Gold Testing03
Jewellery manufacturing
Cut filigree, pendants, earrings and name monograms from gold sheet.
Laser Cutting04
Names, logos & serials
Permanent engraving on gold, silver, brass, copper and steel.
Laser Marking05
Industrial part marking
Codes and identification on metal components.
Laser Marking06
Fine pattern marking
Detailed patterns with UV marking down to 0.01 mm line width.
Laser Marking07
Jewellery repair & joining
Spot-weld chains, settings and fine parts without post-processing.
Laser Soldering08
Electronics & IC leads
Precision welding for electronics, optoelectronics and communication parts.
Laser SolderingWhy FibertekPrecision you can
Precision you can
build a business on.
What working with Fibertek Solutions looks like — from choosing a machine to running it every day.
01
Product-first selection
Machines are chosen for accuracy, build quality and ease of use — not just specification sheets.
02
Four connected technologies
Test, mark, cut and solder — one partner across the precious-metal workflow.
03
Distributor of VRAY VR-Y5
Official route in India for the VR-Y5 benchtop XRF gold analyzer.
04
Guidance before you buy
We help match laser power, working area and model to your material and output.
05
1-year warranty
Every Fibertek product comes with a one-year warranty.
06
Local support from Chennai
Reach us directly by phone or WhatsApp for help and service enquiries.
Warranty
Covered for
Covered for
one full year.
All Fibertek Solutions products — laser marking, laser cutting, laser soldering and the VRAY VR-Y5 gold testing machine — carry a 1-year warranty.
| Gold Testing MachineVRAY VR-Y5 XRF analyzer | 1 Year | Details → |
|---|---|---|
| Laser Marking — Fiber20 W / 30 W | 1 Year | Details → |
| Laser Marking — UV3 W / 5 W / 10 W | 1 Year | Details → |
| Laser Cutting60 W / 80 W / 100 W | 1 Year | Details → |
| Laser SolderingFTK-200W | 1 Year | Details → |
| Industrial Laser SolderingFTK-200/400DH-YAG-W | 1 Year | Details → |
We offer four categories: the VRAY VR-Y5 XRF gold testing machine, laser marking machines (fiber 20/30 W and UV 3/5/10 W), laser cutting machines (60/80/100 W) and laser soldering machines (FTK-200W and FTK-200/400DH-YAG-W).
All Fibertek Solutions products come with a 1-year warranty.
Yes. The VR-Y5 uses X-ray fluorescence (XRF), a non-contact method, so the piece being tested is not damaged. Results are typically available within about 30 seconds.
The fiber laser marking machines mark and engrave gold, silver, brass, copper, steel and other metals, with EzCad or LightBurn software.
The Fibertek laser cutting machines cut gold sheet up to 3 mm thick, with a 60 mm motorised Z-axis.
They weld gold, silver, platinum, titanium and their alloys, electric nickel belt and other materials — used for jewellery, IC leads and tiny heat-sensitive parts.
Send us an enquiry through the contact form, call +91 92071 60110, or message us on WhatsApp at +91 87544 22816. Tell us your application and we will recommend a suitable model.
Get a quote
Let’s find the right
Let’s find the right
machine for your work.
Tell us what you make and the materials you work with. We’ll recommend the right model and share pricing.