Laser marking
machines
Permanent, high-contrast marking and engraving on gold, silver, brass, copper and steel — with fiber and UV laser sources.
- Fiber power
- 20 / 30 W
- Wavelength
- 1064 nm
- Marking area
- Up to 200×200 mm
- Z-axis
- 60 mm motorised
Two laser sources.
Every metal covered.
Fibertek fiber laser marking machines (20 W / 30 W, 1064 nm) mark and engrave gold, silver, brass, copper and steel, with a motorised Z-axis and EzCad or LightBurn software. They can also cut thin gold sheet up to 3 mm.
For fine, low-heat marking, our UV laser marking machines (3 W, 5 W and 10 W) offer 0.01 mm minimum line width and a UV source rated for more than 50,000 hours — available as table-top and portable units.
- Process complex shapesDetailed logos, text and patterns.
- Intuitive softwareEzCad / LightBurn with common file formats.
- Ease of operationRed-light focusing and a motorised Z-axis.
- Durable sourcesMax Pro / JPT M7 fiber and long-life UV.
Choose your
laser source.
*Technical specifications are subject to change without prior notice.
| Source type | Fiber laser — Max Pro / JPT M7 |
|---|---|
| Laser power | 20 W / 30 W |
| Wavelength | λ = 1064 nm |
| Marking & engraving | All metals — gold, silver, brass, copper, steel, etc. |
| Marking area | 100 × 100 mm, 200 × 200 mm |
| File types | PLT, SVG, DXF, DWG, BMP, JPEG, PNG |
| Software | EzCad / LightBurn |
| Gold sheet cutting thickness | Up to 3 mm |
| Motorised Z-axis travel | 60 mm |
| Power supply | 230 V AC, 50/60 Hz, single phase |
| Mini air-conditioner | Optional attachment |
| Weight | 50 kg |
| Parameter | UV-3 W | UV-5 W | UV-10 W |
|---|---|---|---|
| Actual output power | ≥ 3.5 W | ≥ 5.5 W | ≥ 11 W |
| UV laser life | More than 50,000 hours | ||
| Marking speed | ≤ 12,000 mm/s | ||
| Cooling | Water-cooled | ||
| Focus lens | Focal length 110 mm | ||
| Minimum line width | 0.01 mm | ||
| Resetting accuracy | 0.001 mm | ||
| Working area | 110 × 110 mm; 200 × 200 mm optional | ||
| Locate mode | Red light focusing, blue light reminding | ||
| Production line speed | 0–130 m/min (depends on material) | ||
| File formats | PNG, BMP, DXF, HPGL, JPEG, PLT | ||
| Power supply | 220 V / 50 Hz | ||
| Power consumption | 800 W | ||
| Net weight | 50 kg | ||
| Size | 450 × 250 × 700 mm | ||
| Environment | 0–45 °C, humidity 95% non-condensing, no vibration | ||
UV models shown: 10 W table-top (LM-UV) and 5 W portable.
Built for detail.
Built to last.
Highlights across the fiber and UV laser marking range.
All-metal marking
Fiber lasers mark and engrave gold, silver, brass, copper, steel and more.
Motorised Z-axis
60 mm motorised travel for quick, repeatable focusing.
Gold sheet cutting
Fiber models also cut gold sheet up to 3 mm.
Ultra-fine UV lines
UV models reach 0.01 mm minimum line width and 0.001 mm resetting accuracy.
Long-life UV source
UV laser transmitter service life of more than 50,000 hours.
Flexible software
EzCad / LightBurn with PLT, SVG, DXF, DWG, BMP, JPEG and PNG files.
Marks that
last a lifetime.
Marking and engraving on gold, silver, brass, copper, steel and more.
- Gold
- Silver
- Brass
- Copper
- Steel
- Names & logos
- Patterns
- Part identification
All Fibertek laser marking machines — fiber and UV — are covered by a 1-year warranty.
Ask about warrantyRequest a quote for
Laser Marking.
Share your application and preferred model. We’ll get back to you with the right configuration and pricing.
